7 Best Table Saw Blades – 2020 [ Reviews & Guidelines]

Whether you are a professional woodworker, a regular DIY contractor, or just a woodworking enthusiast, you should know that a table saw is nothing without the right blade. If the blade is crummy, you can end up making imprecise cuts, which could ruin your project in the long run. Above all, this would be a total waste of time and money.

Now that you are here, it is clear that you are looking for the best table saw blade for your power tool. You are in the right place because we will be exploring some of the best saw blades you should get for equipment.

Comparison Table (Updated in 2020):

Image

Product Name

Material

Weight

Price

Forrest WW10407125

Carbide

0.01 ounces

Diablo D1050X

Carbide

4.8 ounces

Forrest WW10407100

Carbide

0.01 ounces

Freud P410

Blend

2.3 pounds

Irwin 1807368

Carbide

1.76 pounds

Top 7 Best Table Saw Blades Reviews

Let’s get on with it, shall we?

1.  Forrest WW10407125 10-Inch Blade.

Key-features

  • Carbide Material.
  • 40% STRONGER C-4 CARBIDE.
  • 20° Face Hook.
  • Does rip, combo and crosscut.
  • Ends cutting 1/16˝.

More photos & price on Amazon.com

What We Loved

  • Designed to reduce wood splintering chances.
  • Small kerfs prevents wood loss.
  • Thin but sturdy construction.
  • Fits in any table saw out there.
  • 30-degree ATB teeth angle allows the blade to come to a stop easier.
  • Low back side tear-off.

What Could Be Better

  • It can burn hardwoods.
  • Doesn’t perform well when clearance is set at zero.

Overview

Our first blade comes from Forrest, a renowned brand in the power tools and accessory industry. Actually, most customers have shown their satisfaction with this blade.

It comes in a standard 10-inch size that makes it a versatile unit. In other words, it will work with typically any table saw out there. We loved its compatibility. Besides that, the blade packs 40 individual teeth all around, which is more on a balanced side. It will cut both hard and softwood with ease. However, it may not be the best pick if you want super soft finishes on your workpieces.

This one comes with small kerf that saves up to 1/8-inch on wood loss for every cut you make. Besides that, the blade comes with a 30-degree angle on the ATB teeth. With this, the blade will reach a full stop with ease when you switch off the saw.

Even though this unit is thin, it is still sturdy enough to ensure that you get good results without flexing and wobbling. Plus, the blade has been designed to reduce splintering and the jump that happens when you are moving wood.

Verdict

Even though this blade could be expensive compared to other units out there, it is very much worth every penny. It is strong and sturdy and assures you of decent work output. If you are using it to cut softwoods, then you will find it one of the best table saw blade among all.

2.  Diablo D1050X.

Key-features

  • TiCo™ Hi-Density carbide.
  • Fast, durable, and clean cuts.
  • Perma-SHIELD.
  • Tri-metal shock resistant brazing.
  • Hardened Steel Body.

More photos & price on Amazon.com

What We Loved

  • It is built to last.
  • Decent price point.
  • Laser-cut heat expansion keeps cut true and straight.
  • The stabilizing gaps between 5 teeth limits vibrations.
  • Small kerfs for better accuracy and control.

What Could Be Better

  • It is only available in a 10-inch size.

Overview

Here is yet another top-rated table saw rip blade you should consider getting. Any woodworker understands how good Diablo products are, and this one doesn’t disappoint either. It is made of high-quality and sturdy carbide, which makes it strong enough to handle just about any workpiece out there.

This is a 10-inch that will fit in almost any table saw out there. Plus, it is loaded with 50 teeth for ripping through your workpieces with ease. Furthermore, the blade comes with laser-cut stabilizer vents that help to trap noise and the common vibration when you are using the table saw. With this, you can be sure of the blade remaining cool and also working without warping.

The laser-cut heat expansion slots also allow the blade to expand whenever there is a heat buildup. In turn, this keeps the cut true and straight. The sturdiness of this blade is worth pointing out since it minimizes the need for changing the blades between tasks.

It features a 0.98-inch kerfs between the blades, which is laser cut as well to maximize the accuracy of your cuts and give you more control.

Verdict

This table saw blade is designed to serve both your lightweight and sturdy projects. The features on this blade is prevent it from heating up, offer better control, and assures you of better accuracy on your projects. Still, it is among the best Freud table saw blades. We Suggest you to use a good fence for your comfort

3.  Forrest WW10407100 Woodworker.

Key-features

  • Tooth style: 15° ATB, 20° face hook.
  • Kerf: 3/32".
  • Arbor Hole Size 5/8 in.
  • Teeth: 40.
  • Assembled Weight(lbs): 2

More photos & price on Amazon.com

What We Loved

  • Saves up to 20% on wood loss.
  • Offers you better control when pulling and pushing boards.
  • 15-degree angled teeth allow the blade to come to a stop faster.
  • Designed to reduce jump-ins and offer better control.
  • Feeds easily if you are making moderate rips and crosscuts.

What Could Be Better

  • Thicker than most blades; may not fit some tables.
  • Pricier than most blades.

Overview

Without any doubt, this is one of the top-rated Forrest tables saw blades out there. If you need a blade that won’t disappoint you with your delivery, this should be a nice pick for you.

First off, the blade comes with a 0.100 thin kerf that helps to save wood loss by 20% on each cut. That is something you should be excited about. By the way, this blade is also made of carbide, and it is strong enough to withstand multiple uses every day.

If you are using this blade for moderate rips and those crosscuts on a table saw, you will have an easy time feeding it. Plus, it has been designed to reduce jump-ins and assure you of better control on your workpieces.

This blade comes with ATB teeth that come at an angle of 15 degrees style to stop completely when you turn off the saw. However, some woodworkers prefer a 30-degree angle on the blade. Still, that shouldn’t be a point of concern.

 By the way, some people thought the blade was a little thicker than most models out there. Regardless of that, the blade has been designed to minimize splintering when you are making radial cuts. The top won’t splinter if you are cutting through thin boards and plywood.


Verdict 

In conclusion, this blade scores decently, and it also comes with some features that offer you better control and accuracy on your workpieces. It might be costly, but it is worth the price.

4.  Freud P410 40-Tooth General Purpose.

Key-features

  • Fusion Trio includes a 30º Hi-ATB.
  • TiCo™ Hi-Density carbide.
  • Perma-SHIELD® Non-Stick coating.
  • Arbor Hole Size5/8 in.
  • Blade Diameter (in)10.
  • Blade Tooth Material Carbide.
  • Grind: Hi-Alternate Top Bevel.

More photos & price on Amazon.com

What We Loved

  • Very affordable.
  • Designed to deliver flawless finishes.
  • Laser-cut anti-vibration slots minimize vibration and sideways movement.
  • Axial shear face grind cuts through wood and sheets with reduced resistance.
  • Surface coating prevents rust and buildup.
  • Designed for laminates and woods.

What Could Be Better

  • The teeth can wear down after several uses.
  • It can leave burns in some types of wood.

Overview

Here is yet another good blade that you should consider getting for your table saw. We’d also consider this as one of the best 10 inch table saw blades on the market.

This one comes with an 18-degree hook, a 5/8-inch, along with a 0.126-inch kerf. Furthermore, there is a 30-degree Hi-ATB that lets you slice through melamine and plywood with ease. The blade is equipped with 40 teeth that let you cut through your workpiece without much trouble.

Furthermore, there is a double-side grind design that will deliver polished crosscuts. Plus, the Axial Shear Face Grind will zip through the sheet and wood workpieces with minimal resistance.

The TiCo Hi-Density carbide construction on this one offers a sharper edge, along with a flawless finish. Best of all, the blade comes with a dramatically longer cutting life. We loved the laser-cut anti-vibration slots that will cut down the vibration and sideways movement. In the long run, this will extend the blade life and offer you splinter-free finishes on your workpieces.

Above all, there is a Perma-Shield nonstick coating that will cut down the blade drag. This helps to protect the blade from pitch buildup or any corrosion.

Verdict

Generally, we think this would be a best table saw blade to get for your DIY projects. It might not be the best pick for professional use since it doesn’t really stand the test against prolonged use.

5.  Irwin Tools 1807368.

Key-features

  • Extra-sharp oversized carbide teeth.
  • Heat-resistant non-stick coating.
  • Thin Kerf Design, Laser Cut.
  • Precision tensioned.
  • Arbor Hole Size 5/8 in.
  • Blade Diameter (in)10.

More photos & price on Amazon.com

What We Loved

  • It is precision tensioned for flawless cuts.
  • Large teeth help to remove the excess wood shavings.
  • Strong over-sized carbide teeth let it last for long without wearing out.
  • Can be used on both table and miter saws.
  • Heat-resistant, nonstick coating minimizes gumming and offer cleaner cuts.
  • Perfect for ripping and crosscutting.

What Could Be Better

  • It wears out quicker than most blades.

Overview

If you are in search of the best saw blades for your table saw and you don’t want to spend too much on one, this blade from Irwin would suit you perfectly.

The blade is made with high-quality carbide, and it features 50 teeth to deliver you decent finishes on your projects. This one is the perfect blade for general purpose cutting on your table saw. And by the way, it can also be used on a miter saw.

It comes with an alternate tooth bevel with a racer tooth that will deliver knife-like cuts. The racer tooth also offers you smooth finishes on your workpieces. We loved the strong extra-sharp oversized carbide teeth that are able to last for long without wearing out.

Whether you want to make cross cuts or rips with this saw, you will have an easy time. There are small and a few large teeth on this blade. The large teeth help to remove those excess wood shavings. You don’t have to worry about the blade heating up since it comes with a heat-resistant, nonstick coating. This cuts down the gumming and gives you cleaner cuts.

Verdict

This is yet another table saw blade that would be perfect for the general DIY projects at home. It might not be the best pick for massive projects.

6.  DEWALT DW3106P5D60I Series.

Key-features

  • Thin kerf design.
  • Anti-kickback shoulder.
  • Computer-balanced plate.
  • Diameter: 10"
  • Arbor Size: 5/8"
  • 60 Teeth

More photos & price on Amazon.com

What We Loved

  • Computer balanced plate for better finishes and improved accuracy while reducing vibration.
  • Unique wedge shoulder design offers smoother finishes.
  • You get two blades when you buy it.
  • You will experience limited resistance when working with this blade.
  • Thin kerfs for quick and smooth cutting action.

What Could Be Better

  • Some users prefer thicker blades.
  • The teeth will require several sharpening

Overview

If you are a fan of thinner blades, this one from DEWALT would be a good pick for you. This one also comes in the standard 10-inch size that makes it very much versatile. It would fit in most table saws out there.

This is one of the thinnest blades out there, and it also comes with 60 teeth to offer you finer finishes on your workpieces. The best part is that you get two blades when you purchase this one. So yes, that assures you of a reliable replacement when one wears out.

The thin kerfs on this one allows for the smooth cutting action. In other words, you can slice through the workpieces with limited resistances. We thought that was a feature worth pointing out. The teeth on this baby have special wedge shoulder design, which offers a small shoulder behind them. As a result, you will be sure of more power behind each tooth as you cut through your workpieces.

 The balanced computer plate on this blade cuts down the vibration, which then offers you better finishes and accuracy.


Verdict

If you love soft finishes and you don’t mind re-sharpening the teeth several, then you would love using this blade. It might not be too thick, but we think it would perfectly suit your softwood projects. The best part is that they come to two blades when you purchase it.

7.  HICO CBW1060 10-Inch.

Key-features

  • Teeth 60 ATB (Alternate-Top Bevel). 
  • Hi-Density Carbide with Titanium.
  • Arbor 5/8"
  • Laser cut stabilizer vents trap noise & vibration.
  • Kerf 0.1".
  • Hook Angle 15 degree.

More photos & price on Amazon.com

What We Loved

  • It is designed to offer quite cuts.
  • The blade comes with a small kerfs for smooth cuts.
  • High-grade carbide material for durability.
  • Can be used for cutting different types of woods.
  • Works also on circular and miter saws.
  • One of the cheapest blades on the market.

What Could Be Better

  • The backside can begin catching some rust.

Overview

This might be the last product on our list, but it certainly isn’t the least favorite. It is also a good blade that comes with a 10-inch diameter, along with 40 teeth.

The kerfs on this one are 0.1-inch, which helps to prevent wood loss as you are working on your projects. By the way, this baby is made of high-density carbide with titanium that assures you of a durable unit. Besides, this helps to give you flawless finishes on your workpieces.

The blade comes with laser-cut stabilizer vents that will trap noise and vibration. In turn, this will make the blade cook and prevent it from warping. We loved the double-side grind design that will deliver polishes crosscuts.

Furthermore, there is an Axial Shear Face Grind that will zip through the workpieces with reduced resistance. We thought that this blade is the best for cutting hardwoods, softwood, plywood, or chipboard with your table saw.

Besides that, it can also be used on circular saws and miter saws. So yes, it is a reliable unit to have.

Verdict

This being one of the cheapest blades out there, it would be the perfect saw for the minor projects that don’t require too much ripping. It is decently durable for its price and can prove reliable for those DIY projects at home.

Buying Guide

Now that you have a clue of the best table saw blades to consider buying, it would be important to know how to pick one too. Maybe none of the aforementioned table saws suits your project needs. That being said, here are the things we considered when we were looking for the best table saw blade review out there.

  • Consider your project

What will you be using the blade for? Do you want to use it for ripping or crosscutting? For ripping, ensure that you choose the one that can cut large boards into smaller sizes with ease. If you need to crosscut, you will be looking for one that has more teeth to limit the tear-out.

  • The material of the blade

What is the blade made of? Is the blade strong enough to last for long without wearing out? If you are cutting materials like plywood, plastic laminate, particle boards, or MDF, then you should go for an ATB blade or an all-purpose blade. A carbide blade would also be a good choice here.

But if you will be cutting hardwood or metal sheets, ensure that you go for a steel or steel alloy blade. The blade should be strong enough to handle the hard workpieces with ease.

  • The number of teeth/Configuration

You need to consider the number of teeth on the blade before you purchase it. To make things clear, a blade with a lot of teeth will offer you smooth finishes, and they help to cut large boards into smaller pieces. Conversely, fewer teeth help to cut slower cuts but are the best for the hard cutting wood and other hard workpieces.

Ideally, go for 24-tooth blades for the hard workpieces and the 40+ teeth for smoother finishes.

There are different table saw blade types in terms of the teeth configuration. Normally, they come in four types; the flat top grind (FTG) blades, alternate top bevel (ATB) blades, triple-chip grind blade (TCG), and a combination of ATBR blades.

The flat-top grind blades come with teeth that have square top edges, and they are best for ripping through materials. Alternate top bevel blades are angled at the top and are best for slicing through workpieces for a clean cut. On the other hand, triple-chip grind blades have teeth that alternate between FTG and chamfered teeth. They are ideal for making rough cuts and cleaning up the cuts.

The ATBR hi-breed blades come with five sets of blades, with one FTG tooth and four ATB teeth. They are best for ripping through materials.

  • The Size of the Blade

There are mostly two common sizes of blades used on table saws. You can get the 8-inch table saw blade and the 10-inch variation. Here, you have to choose the one that will fit in your table saw perfectly.

  • Kerf

The kerf of the blade is the width of the cut that a blade can make in the material. You can get thin-kerfs and full-kerfs. The full-kerf blade cuts a 1/8-inch into the material, and it needs a lot of power. On the other hand, thin-kerfs cut less than an eighth of the thickness into the material, and they need less power.

If you have a table saw with a motor rating of more than 3hp, then you can easily use the full-kerf blade. But if it is less, then a thin-kerfs would do.

Above all, check if the blade has a heat-resistant coating and consider its hook angle too. A high hook angle will offer an aggressive cut at a fast feed rate and is perfect for ripping jobs.

Our Related Review Articles

FAQs

  • How many teeth should a table saw blade have?

The number of teeth that you choose for your saw will determine how you intend to use it. If you want to make clean cuts with smooth finishes, then you should go for a blade with 60+ teeth. For the coarse cuts, a 24 tooth blade would be good enough.

  • Are more teeth on a saw blade better?

Not exactly, it is all about what you need from the saw with regard to your project needs.

  • What is the best TPI for cutting wood?

Generally, a coarse tooth blade with two to three TPI is a good pick for re-sawing wood and cutting the thick stock up 8 inches. But for general cutting of ¾-inch wood, then a 4 TPI would be the best pick for a fast cut. On the other hand, a 14 TPI will offer you a slow cut but deliver smooth finishes.

Final Verdict

So, now you have an idea of the best table saw blades. Which one will you be going for? Would you prefer one for slow and smooth cuts or one for fast and coarse finishes? Whichever you pick, ensure that it meets the exact needs of your projects for you to get the expected results. Don't forget to make sure safety precautions while attach the blade on table saw