Pick The 7 Best Table Saw Fence-2021 [Expert’s Guideline]

As an Amazon Associate I Earn From Qualifying Purchases.

Table saws are known to help you make those accurate woodcuts in the simplest way and shortest time possible. But what makes them even faster and more productive is a fence. So, a table saw fence is equally important as the table saw itself.

A good portable table saw fence would reduce the time you would use to re-cutting the workpieces and assuring you of less wasted material. In the long run, it helps to save you cost.

Best table saw fence reviews

Best table saw fence reviews


Product Name

Bar length



(Best Value)

Delta BC30T2


31.3 Pounds

(Top Picks)

DELTA 36-T30 T2


29.9 Pounds

(Best Overall)

Shop Fox W1410



Shop Fox W1716


53.3 Pounds

Delta Power Tools 78-919BT2


31 pounds

In this article, we also will be discussing some of the top quality Table Saw Fences.

The 7 Best Table Saw Fence Reviews Of 2121

With all the table saw fences out there, it can be hectic to shop for the right unit. However, here is a look at the top 7 units that you should give a shot.

1.  Vega U26 Table Saw Fence


  • Professional Model.
  • Extremely refined for serious woodworker.
  • Larger components.
  • Greater rigidity.
  • Cuts heavier materials and commercial use. 
  • Pre-drilled and tapped holes.
  • Jacking Plates.

More photos & price on Amazon.com

What We Loved

  • Strong and secure.
  • Buttery smooth slide for easy nail-down accurate cuts.
  • It is quite versatile.
  • Easy to install.
  • Easy to adjust.

What Could Be Better

  • Some parts have metal burrs from manufacturing


First up on the best table saw fence list is this unit from Vega. This is one of the best replacement table saw fences you might want to consider buying. The fence system is designed to fit most saws. So, it would be fair to say that this is a versatile table saw fence.

It is a 36-inch fence bar that is 26 inches to the right and 8 inches to the left of the blade. There's a micro-adjustment and auxiliary table support that enhances its delivery. The best part is that it has been made with strong steel construction.

Specifically, this fence comes with existing bolt holes of Delta Unisaws, most Sears’s 10-inch saws, Powermatic Model 66, and contractor's saws. In other words, you won't need to drill any holes in it. The mounting system on this fence lets you make full adjustments. In turn, this will offer you an easy time when making accurate cuts.

The fence is easy to install since it would take you less than 15 minutes to set it up. By the way, there are front and rear rails that the fence mounts on.

Generally, you will get plenty of space to make rips of different sizes in this unit.


This is a good fence to get for your table saw. It has been made to be secure and last for long enough. Furthermore, the fence is easy to install and gives you an easy time when making accurate cuts. Even though it's not that cheap, it still would be a good buy for you.

2.  DELTA 36-T30 T2 Table Saw Fence


  • Clamps securely to front tube & rear rail.
  • A steel guide tube with scale.
  • Steel tube fence body glides easily.
  • Projected aluminum face.
  • 3-point T square locking system.
  • Added rear hold down support.
  • Can handle quick and repetitive work.

More photos & price on Amazon.com

What We Loved

  • It clamps securely in place, hence prevents wobbling.
  • It allows you to make super-accurate cuts.
  • It is made of sturdy steel and aluminum.
  • T-square locking system with three points to offer better accuracy.
  • Rear holding stability for feather boards and jigs.

What Could Be Better

  • The fence might require some adjustments.
  • Not compatible with some jobsite models.


DELTA is another top-ranked power tools brand that is known for its high-quality products. This unit comes with a strong construction that makes durable and stable enough.

The steel tube body and welding offers its extra strength at the joints. Plus, it comes with a smooth surface that glides smoothly when you position and when using it. The mounting design on this fence for delta table saws specially.

Besides that, the most accurate table saw fence comes with a three-point locking system along with twin hairline pointers. With these, you will be sure of placing the fence parallel to the blade. Furthermore, it offers you accurate cuts within 0.4mm.

By the way, you might have to make a few adjustments for the fence to work accordingly, according to your table saw. Even though the main body is made of sturdy steel, you may have to use some reliable aluminum fence pieces.

We won't fail to mention that the fence clamps securely to the front tube, and it will hook over rear rails to let you add the necessary attachments. Also, there are some extra supports that are attached from the back. These supports will keep the rails from wobbling whether there is wood inside or not.


If you like working with customized power tools and accessories, you will enjoy working with this unit because it comes with some adjustment requirements. Besides, it is a very sturdy and reliable fence to have in your workshop.

3.  Shop Fox W1410 Table Saw Fence with Rails


  • Strongest, most accurate fence.
  • Unprecedented repeatability.
  • Unique ball bearing quires.
  • For both left/right-handed sides use.
  • installation & locks on both ends.

More photos & price on Amazon.com

What We Loved

  • Strong and very secure unit.
  • Reasonable price tag.
  • Fine-positioning knobs on both sides.
  • Ball bearings to let you roll the fence with a single finger.
  • The instructions are easy to follow.

What Could Be Better

  • It only fits table saws with 27-inch blades.


Here comes another best table saw fence system that you might want to add in your arsenal. When it comes to sturdiness, this one right here stands among the best.

The fence is not only strong and sturdy, but also one of the most accurate tables saw fences out there. The repeatability on this fence is one of a kind. This fence will secure simultaneously on both the front and rear. For that, you will be sure of having a rigid and accurate unit that will help you achieve satisfying results.

With this fence, it will fit saws that have 27-inch blades. And, for the record, there are unique ball bearing guides that let you move the fence with a single finger. By the way, this fence comes at a relatively lower price than most units out there.

You will have an easy time when installing this fella, and locking the ends is also a walk in the park. There are some fine-positioning knobs on each side. This way, both left, and right-handed users will have an easy time adjusting the positioning of the fence.

However, you will need to drill holes for mounting because there are no pre-drilled units as such.


If you are in search of a reliable best aftermarket table saw fence that doesn't cost too much money, this unit wouldn't be a bad pick. This one is easy to use and delivers decently as well.

4.  Shop Fox W1716 Table Saw Fence


  • Standard 57-inch rails.
  • Wide right angle design.
  • Aluminum & Steel fence body.
  • Size 57-Inch.
  • Durable, strength, & light weight.
  • Single locking cam action lever

More photos & price on Amazon.com

What We Loved

  • It fits most saws with ease.
  • Comes with a wide right-angle design for maximum support and accuracy.
  • Magnified cursor lens.
  • The fence wear pads are adjustable.
  • Steel and body construction for strength and durability.
  • 30-inch maximum rip to the right.

What Could Be Better

  • The installation instructions could be better.


For the professional woodworkers that need a reliable fence for their table saw and aren't afraid of spending that extra dollar, this one would be a good fit for you.

The price is on a high, but its delivery is also reliable enough. This fence is made of steel and aluminum body for enhanced strength and durability. The thick extruded steel and aluminum construction and the right-angle design make the fence accurate and durable as well. Even with the steel and aluminum construction, this fence is still lightweight and easy to handle.

It comes with standard 57-inch rails that offer you a maximum rip of 30 inches to the right of the blade. By the way, this one will fit most table saws without a problem.

There are some adjustment points that are widely spaced to give you accurate setup. The torsion box design and cam-lever front locking mechanism allow the fence to fit on almost any table saw out there. The best part is that you will not need a rear locking mechanism for that.

We loved the self-adhesive measuring tape and adjustable magnified cursor on the fence. This offers you the chance to position the fence quickly with a high precision degree.


This will be the perfect pick for a professional or if you have an equally high-quality table saw. The price is not low, but it is worth every penny.

5. Delta Power Tools 78-919BT2 Table Saw Fence


  • 3 point locking system.
  • Adjustable for fast & accurate cuts.
  • Weight 31 pounds.
  • Simple design.
  • Solid surface.

More photos & price on Amazon.com

What We Loved

  • Ideal for the older table saws.
  • Simple design for easy handling.
  • Wood panel walls are covered in a smooth plastic layer to prevent snag and holdups.
  • Solid surface for making rip cuts.
  • It is very adjustable.

What Could Be Better

  • Doesn't fit in some table saws.


Here comes another good choice if you are looking for a table saw guide bar for your saw. This one comes with a simple design and assures you of accuracy with its delivery.

If you have an older table saw at home and you want the perfect fence for it, this is what you should be going for. But, it could also go well for a refurbished saw. Either way, this is a saw that will deliver accordingly.

We really loved the adjustability of this fence. The whole fence can be adjusted to offer you fast and accurate cut whenever. The best part is that the fence comes with a simple design. There is nothing too complicated about this saw. Getting started with it and using it, in general, is easy breezy. You might not even need a manual to guide you.

Even with its simple design, this saw is very much functional. With this fence, you get a solid surface to place your wood projects as you make the rip cuts.


We would recommend this fence to anyone that has an older table saw, and they aren't ready to buy a new saw. It is simple to use and fully adjustable as well.

6. Delta BC30T2 Table Saw Fence


  • 1/4” section angle iron rail.
  • Mounting design.
  • Durable and non-marring.
  • 14 gage welded steel.
  • 3 point locking system.
  • Securely clamps to both front tube.

More photos & price on Amazon.com

What We Loved

  • It is sturdy and durable.
  • It will roll smoothly once lubricated.
  • A quick-action handle with magnets gives you an easy when controlling the fence.
  • Clamps firmly to the front tube for perfect parallelism,
  • 9-ply birch plywood sides prevent marring.

What Could Be Better

  • It requires too much adjustment


This table saw fence can easily be found among the top Delta table saw reviews because it is made to last for long with offering you stability.

The fence comes in a single-piece steel guide tube that measures 2 by 3 inches. The welded steel construction means that it will stay strong as it restricts rust and corrosion. This one comes with rails and legs, and it also features laminated 9-ply birch plywood sides that enhance the durability and sturdiness. Besides that, this will prevent any chances of marring.

It glides easily on solid nylon pads, and it comes with a quick-action handle with magnets on it. This fence will clamp securely to the front tube to keep it perfectly parallel to the blade front to back. Even though it comes at a relatively high price, we thought it was well worth it.

You might have to make some adjustments for you to make it roll smoothly and assure you of accurate rip cuts. Some sanding and lubricating will help it deliver even better.


This is one of the best table saw fence system to get, only if you don't mind the adjustment and lubrication to make it work efficiently. Besides that, it is such a reliable unit to have.

7.  Uni-t-fence PW1113 best budget Table Saw Fence


  • Heavy duty.
  • Aluminum extrusion up-grade.
  • Simple mounting.
  • Uni-fence Table Saw System.
  • Extruded square design.
  • Comes in 36" and 43".

More photos & price on Amazon.com

What We Loved

  • Very cheap & Easy to mount it.
  • T-style fence.
  • Locks securely on a single rail.
  • Strong and sturdy construction.
  • No tools needed to set up and adjust.

What Could Be Better

  • The corners are somewhat weak; they can get deformed.


You might think that this is the least favorite fence to consider, but you'd be wrong to think that way. On the contrary, this is a very reliable saw that you'd want to have and also one of the best budget table saw fence.

Furthermore, this is the cheap table saw fence on the list. So, it would be the perfect pick for someone that is on a tight budget. But don't be fooled by its low price.

The fence comes with a heavy-duty aluminum construction that makes it sturdy and durable. This unit would easily replace the Stock delta bench top table saw fence that mounts to the saw fence guide. It comes with a single-mounting design. All you have to do is slide the stock fence off and slide the fence on. You won't even need any complicated working tools to handle that.

By the way, you won't need to drill any holes in this unit. To use this fence, you will need the Delta Uni-Fence. Unfortunately, it is not provided with the product.

With the extruded design of this fence, you can attach or build multiple jigs and fixtures without a problem. Typically, it won't be wrong to consider this a universal table saw fence system.

You won't need to readjust or re-check the fence since it locks into place on a single rail. In other words, it is very easy to use.


If you are looking for a decent fence for your home-based table saw, this wouldn't be a bad pick for you. The saw is not ideal for a heavy-duty saw that handles massive projects. It is perfect for the DIY and small project table saws.

What’s The Best Way To Use A Table Saw Fence?

Before aligning your fence make sure your saw's blade and miter slot align in parallel, You can learn it from saw's user manual. let's get into the business.

  1. Place your fence close to your miter slot.
  2. You can use your finger to determine that the fence is placed the same distance by top to bottom.
  3. If you feel uncomfortable use "dial indicator", it will assure you the perfect distance.
  4. Remember Don't start your project before ensuring the proper distance between blade and fence, It may ruin your project in a bad way.
  5. If the dial indicator shows the negative result please take the fence away and check the fence manual that you set all the screws correctly or not.
  6. I suggest you not to do any experimental task with your main project. 

Buyers' Guide

Best table saw fence guide

Best table saw fence guide

So, there goes the top 7 top rated table saw fence reviews. Which one will you be going for? It is not a must that you choose one of the fences we just listed above. However, we would advise you to follow this buyer's guide to help you find the ideal fence for your table saw;

Build material 

First off, you need to consider the construction of the saw. How do you prefer it, and how will you be using it? Ideally, you should go with a fence that is constructed from steel and aluminum. Here you will be sure of enjoying a fence that is sturdy, durable, but still lightweight. Above all, it assures you of having a saw that is rust-resistant.

Keep in mind that some fences are made of wood and plastic. These units tend to be susceptible to breakage. That is why a steel and aluminum fence would be the best pick.


The weight of the fence is another factor that you should consider. A lot of people ignore this feature, but it is worth considering. If the fence is too heavy, it may not slide easily, which could put some serious stress on the table. This will also force you to use more energy.

On the other hand, a fence that is too light might come with a poor build quality, which could lead to the possibilities of it breaking. Those made of plastic and wood tend to break too easily.

In this case, consider getting a fence that ranges between 30lbs and 50lbs.

Rip Capacity 

This is a very important factor that you need to consider as you shop for a good table saw fence. You need to determine your own rip capacity. In this case, you should choose the rip capacity based on your project needs. Don't forget to put your future projects into consideration. Maybe you will need larger rip cuts in the future. In this case, choose a fence that is highly adjustable based on the rip capacity.


Maybe you are in search of a table saw fence upgrades. In this case, you will need to consider the modifications of the fence. If the fence itself doesn't suit your saw and project needs specifically, it should be to be modified to the best of your expectations.

Furthermore, go for a fence that perfectly fits on your table saw. Don't forget to go for a fence from a reputable brand. The price is another factor that you should consider when choosing the fence. It is all about choosing a fence that meets your project needs and preferences.

Our Related Review Articles


Which portable table saw has the best fence?

There are multiple portable saws out there with different fences on them. Some fences might not as reliable as such with different factors to consider. Basically, it is important to look deep into the features and specifications of the fence of each portable saw. Nevertheless, ensure that you go for the saws from reputable brands.

What is a Unifence?

This is basically a T-square style fence, which locks down securely and slides easily across the table. This fence will be ready for cross cuts since they slide easily forward and backward on the head. Furthermore, this feature means that you can use them as a stop when you crosscut, called unifence table saw fence and rail system.

Final Verdict 

So, there you have it. As of now, you can step outside and pick the best table saw fence without any problem. Just remember to consider your project needs and your preferences as you choose the fence. Don't forget to always go for a reputable brand when buying the fence for your table saw.

12 thoughts on “Pick The 7 Best Table Saw Fence-2021 [Expert’s Guideline]”

  1. Thanks for the information. It was very very helpful. actually I was confused about two brand product which was delta or shop fox. Now I got a clear idea about those two.

    It would be more helpful if I get some safety tips from you about the table saw.

    Thanks for helping

    • Hello William!
      Thanks for your nice words.
      Most people suffer while using a table saw because they don’t know the proper safety tips. To know safety tips I published a detailed informative article to help you guys. please have a look at my article which is on Table saw safety

  2. Hi Jordan!

    I read the whole article, I liked your top product list, As you mentioned that Vega U26 Table Saw Fence is the best table saw fence among all. I also used it, Its very effective one.
    Thanks for your well researched article.
    keep helping people.

    • Hey Jacob!
      Yes, I also have the experience of this Vega U26 Table Saw Fence. Most of the people around the world like this one as the first priority.
      That is why I kept it on the number one position. Thanks for your feedback.

  3. To me fence is really important. I liked your selection list of best table saw fence. I’m experienced on few of them. It was helpful review indeed

  4. I’m bit sad to see DELTA 36-T30 T2 in number 3. It should be in number 1 for sure. Can you explain it why you put it in number 3? I’m using it since last two year and it going perfectly well.

    • I agree with you about DELTA 36-T30 T2, yes this the one you can consider as the first place but I suggest you use Vega U26 your preference will change. I found this one extra-ordinary.
      Thanks for your feedback!


Leave a Comment