A tile saw often called a wet saw, is equipment that is very much like an electric miter saw, the only difference being that it uses a diamond-encrusted blade which also comes with a water-cooling system.
As a result of this, the tile saw is simply called a wet tile saw. Learning how to use a wet saw is important if you want to embark on a tiling job that will demand you cut many tiles to fit edges and some corners.
Wet Tile Saw with HydroLock Water Containment System
If you want some special cuts and shapes, such as an L-shaped cut, a wet saw is what you need for such operations, which makes the wet saw a necessity.
Why Should You Learn How to Use a Wet Saw?
Having knowledge of how to use the saw properly will help you to achieve desired results and reduce the chances of casualty, resulting from improper use of the machine. This article will answer some frequently asked questions, such as: How to use a wet tile saw, how to use a wet saw to cut tile, and precautions to note when you use your tile saw.
4 Easy Steps of How to Use a Wet Saw
Follow these step-by-step instructions, to ensure proper use:
Step 1. Set the Wet saw
It is important to set the wet saw at a level that is comfortable for your height, so you can have control when sawing. This will give you the best results with your cuts and also save you from any injury that may occur when the tile is set above your level.
Step 2. Mark the cut and position the tile
Mark the cut and position the tile onto the cutting table; you must measure and properly mark your desired cut on the tile, either with a pencil or a non-permanent marker, once this is done, position the tile, then properly adjust the fence until the blade aligns accurately with your drawn marks on the tiles.
Step 3. Turn the wet tile saw on
Turn the wet tile saw on; Having placed the tile perfectly, turn on the power, this you can do by pressing the power button and wait for the blade to reach maximum speed, also it is necessary to ensure water is spraying into the blade, once you confirm this you can proceed with your cut.
Step 4. Clean the Wet Saw
Clean the Wet Saw after every use: the wet saw, just like every other machine, must be maintained, this is so that it can last you a long period of usage and possibly years. The saw should be cleaned properly after every use, preferably with a sponge.
Accurate measurement is important:
Taking accurate measurements is almost half of the entire project; therefore, ensure you work with good judgments.
Before making your cuts with the tile saw, ensure there is water in the reservoir and also pour water in the tray, just enough to cool down the blade, as overheating the blade can be dangerous. Also, ensure you use safety gloves to protect your hands.
Press on the green button or whatever color your power button is and feed gently with a perfect grip, the tile to the blade.
Finally, once you are done with your cut, you must patiently wait for the blade to stop rotating and then take off the pieces, unplug the wet saw and clean thoroughly, desirably with a sponge. see more tile saw here....
Precautions to note when using your saw
There are different situations to consider before, during, and after using a saw:
- Operating the wet saw with no water in its reservoir can overheat the tile and cause the tile to break; also, it can cause the defect to the blade and produce dust, so you must not operate the saw without water.
- You are to use protective/safety gloves when cutting tiles on a wet saw, the edges of tiles can be very sharp, and this can result in injury when safety gloves are not used. So, to ensure you sustain no injuries, a safety/protective glove is advised.
- Protecting the eyes when operating a saw, this is also greatly advised. Eyes must be protected as particles can easily get into the eyes and cause injuries; therefore, steps must be taken to protect the eyes during the operation of a sawing machine.
How to use a wet saw to cut tile?
You must confirm that your measurements are accurate this you; must do before proceeding to cut your tile, this importance of accurate measurement is explained in this article. A marker and an L-square are best at giving accurate measurements.
How to use a wet saw quickly ?
Position the tile saw on a sturdy surface; this is so important and is the first step in using your wet tile saw, this is because when the tile saw is placed on a wobble table, it can result in you having inaccurate shapes and even be the cause of an injury, which is not one of the things you desire, so the tile saw must be securely positioned, preferably on a heavy, bulky table or left on the floor.
This tool is essential for daily tasks and carpentry tasks, but you must be very careful when using it. All instructions and precautions must be taken to avoid any possible damage.